Spypoint Bloodline User Manual download pdf (Page 8)

DELAY

To select the time interval before the camera records another

photo or video. This option prevents from taking too many

photos or videos.

MULTI-SHOT

To take up to 4 consecutive shots at each detection, with a

10 second delay between each photo. This option allows

up to 4 pictures from different angles when the camera is in

« PHOTO » mode.

VIDEO LENGTH

Allows you to select the recording duration when the camera is

set in « VIDEO » mode.

DISTANCE

The « DISTANCE » dial (placed on the side of the camera) can

adjust the sensitivity of the detector. The camera is equipped

with a detector sensitive to infrared. The system detects only heat

source in motion. The greater the mass of heat, more sensitive is the

system. Range of detector is between 5 and 50 feet. Turn dial up

to increase distance. The best way to adjust the distance is to set the

camera in mode « SET/TEST » (see above). Make sure to have the

least possible objects in front of the camera during the positioning.

This prevents picture taken by the camera when oriented towards

the sun while an object moves in front of the camera (eg. a branch)

DOWNLOAD TO A COMPUTER

To transfer or view photos and videos on a PC, you must first

turn the camera « OFF » and connect the USB cable (supplied)

from the camera and to your computer. The computer will

recognize the camera and install the software itself. Click on

« My Computer » and select « Removable Disk ». Then click

« DCIM » and « 100DSCIM » to find all your photos

and videos.

Taking the SD card out of the camera and inserting it into the

computer port will achieve same results. If no SD slot is built

into the computer, a multi-card reader RD25-1 (sold separately)

must be used.

English

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

No comments

Spypoint Bloodline User Manual Page 8